Making Your Heat Source The Centre Of Attention In Your Home

It’s without a doubt that there are many ways to heat your home when the cold weather hits. But when you really think about it, deciding on the most suitable heat source for your home can be a challenge for your comfort and budget. If you’re building or remodelling your home with aluminium balustrades you’d want your heat source to be highly effective and truly valued by your household. You may be wondering what kind of heat source would provide the value that will suit your needs or you may have wondered what popular choices are out there for today’s homeowners. Here are 6 different ways you can make your heat source to keep you and your family warm during the cold weather.

ADOPT GEOTHERMAL HEATING SYSTEM

Geothermal heat pumps operate in a different manner when compared to conventional air source heat pumps. Unlike these heat pumps, geothermal heat pumps are quieter and don’t need the outside temperature to function. With the temperature of the earth which remains at constant state beneath the surface, this highly efficient heat source exchanges heat with the earth rather than using outside heat. The adoption of this heat source will enable you to save energy and heating expenses although the cost of the initial installation of the geothermal installation can be quite expensive when compared to traditional air-source systems. They also require little maintenance and have a longer lifespan. There are various Balustrades options you can select to improve the appearance of your home as well as safety. 

USE STEAM OR HOT WATER SYSTEM

The use of steam and hot water system has provided amazing benefits to homeowners. Steam is a very effective heat transfer fluid that has a low mass density and no temperature limitation. It also transfers heat very quickly and has great potential for control. However, even with its high efficiency, it is known that hot water systems are more efficient than steam boilers. 

Some Homeowners are even making the switch from steam systems to hot water systems.  This type of switch is becoming popular because of the lack of know-how in steam system maintenance is as a result of underperformance of a great number of steam systems. Furthermore, the adoption of the steam system means a boiler replacement. As the state of the existing boiler is usually old, part of the savings obtained after the installation can be explained by the system switch. You should look at this process as an investment that can bring benefits to the steam system too. 

INSPECT AND CLEAN OUT THE FIREPLACE

It doesn’t matter whether you’re using it as a heat source or not, regular Cleaning and inspection of your outdoor fireplace shouldn’t be overlooked. Most homeowners have not realised that their gas unit requires as much cleaning and maintenance the same way a wood-burning stove does.

There are cases where rust can build up and any developed cracks can lead to carbon monoxide and gas leakage. A possibility like this has the potential to cause severe damage or even destroy your home. Another point to consider is the type of wood to burn in your fireplace if you already set up a wood-burning fireplace. Avoid using old wood gotten from the deck, there’s a possibility that the timber was treated with creosote or exposed to pressure. It may not seem like a big deal if you use that scrap wood you have in your backyard. But if you do, you will be burning toxic chemicals within your home’s vicinity.

HEATING STOVES

If you want to opt for the traditional style, then consider using heating stoves. They serve as an efficient heating source by burning different types of fuel types like wood, charcoal or pellet fuel. This heating system provides unmatched ambience to your living space. The heating system comprises of solid metal such as steel or cast iron confined fire chamber, adjustable fire control and a stone base. A majority of these heating units can even heat your entire home. You can make use of pellet stoves. They are easier to install than wood-burning stoves. Although wood-burning stoves still provide its benefits. Many of them are engineered in such a way that they can be transformed to multi-fuel stoves with the introduction of a grate. If you decide to use wood-burning stoves as your home’s heat source, there are various wood burning stove manufacturers that you can choose from. 

SOLAR HEATING

Solar heating comes in two different forms which are: active and passive. The heat that is generated in passive solar heating is dependent on solar supply. Which means that heat is generated in your home as solar heat passes through the windows and skylights. The use of an absorber and thermal mass keeps the heat retained. In your home, the absorber is usually a floor covering like engineered wood while the thermal mass is the walls made of materials like cement that retain heat. Ensure you install skylights and south-facing windows to increase your solar yield and also lower your heating costs. On the other hand, active solar heating uses a solar collector to trap the sun’s heat to warm liquid or air. It is then stored or transferred to the living space with the use of a blower.

RADIANT FLOOR HEATING

This method of heating is one of the preferred heating techniques for many home builders. Even homeowners are installing this heat source due to its many benefits. You can install the equipment beneath the floor, or in the walls or ceiling panels. This means that there won’t be any register or radiators to obstruct the traffic flow or furniture set. This heat source also improves energy efficiency in commercial buildings. One of the reasons why radiant heating is mostly preferred to other heating source is because it gets rid of lost heat through ductwork. It is also quieter to operate and has chances to distribute allergens than a forced-air system. 

Share this article